IRIS4 La Marzocco智能套件 S3 Remote · C3 Dosing Chip

IRIS4 GUIDE

Auto Standby, Screen Sleep, and Physical Buttons: What Keeps Running in the Background

Clarifies which screen, C3, Bluetooth scale, network, and physical-button functions keep working after auto standby.

When the screen turns off automatically for the first time, many users worry that target-yield control, the Bluetooth scale, or cloud status has stopped too. In practice, auto standby mainly rests the screen and backlight. It does not power off C3 and does not disconnect every background connection.

1. What Auto Standby Actually Turns Off

ItemAfter Screen Sleep
Screen and backlightTurn off or dim to reduce long periods with the display lit.
C3 dosing controlDoes not stop because the remote screen sleeps; C3 continues to execute extraction-stop logic.
Bluetooth scaleUsually remains managed by C3, provided another device has not taken the connection.
Wi-Fi and admin portalThe device may stay on the network for settings, OTA, or cloud synchronization.

2. Recommended Standby Time

The admin portal normally offers 0, 30, 60, or 120 minutes. Home users can start with 30 minutes. During continuous installation or acceptance testing, use a longer temporary timeout. A value of 0 usually disables auto standby, but keeping the screen on permanently is not recommended.

3. How to Use PWR and BOOT

PWR Short Press

Normally sleeps or wakes the screen. The first touch after sleep should only wake the page and must not activate the control underneath.

PWR Long Press

Shuts down the device or enters a deeper power state. If a powered-off unit only charges when connected, long-press again to boot.

BOOT

Can display or reproduce the most recent extraction curve for installation acceptance or support review.

4. When to Restart

If pages stop refreshing, cloud status remains pending verification, or the scale does not recover after a phone takes its connection, first refresh from the admin portal or restart S3. Do not attribute every fault to auto standby; it is mainly a display policy, not extraction-control logic.

5. Related Information

For complete button, gesture, and standby rules, read the auto-standby section of the online manual. To buy a remote or confirm current stock, open the device store.

Back to User Guide Support